簡介： 全自動真空碳氫清洗機過程由PLC自動控制，設備生產主線由2個真空脫氣超聲波清洗，1個強力真空超聲波洗， 2

個蒸汽洗+真空干燥組成，其工作原理是利用超聲波滲透力強的機械震動力沖擊工件表面并結合碳氫清洗劑的化學去污作

用，在真空狀態下進行清洗，使工件表面和盲孔、狹縫干凈。

工作過程： 由操作者將裝有工件的清洗籃放在進料臺上，然后自動送至清洗機進料位，經機械手將清洗籃依次推入清洗機內進行

清洗、真空干燥，后經出料臺自動將清洗籃送出，（取出工件），完成整個清洗到烘干的過程。

清洗原理： 碳氫清洗劑的清洗原理簡單地說是依據溶劑的溶解力進行清洗?；趯τ椭蛴托晕廴镜娜芙庑缘拿撝瑱C理：相似相

溶原則。水能與具有與水結構相似OH的化合物如R-COOH（低級脂肪酸）、R-OH（低級醇）等互溶也是基于此。

異種液體間的溶解性與表面張力、界面張力有密切關系。

兩者間的界面張力值近似容易互溶

Brief introduction：

The process of automatic vacuum hydrocarbon cleaning machine is automatically controlled by PLC. The main production line of the equipment consists of 2 vacuum degassing and ultrasonic cleaning, 1 powerful vacuum ultrasonic cleaning, 2 steam cleaning + vacuum drying.Its working principles is that the mechanical vibration force impacts the surface of the workpiece and combines the chemical decontamination effect of the hydrocarbon cleaning agent to perform a comprehensive cleaning under vacuum to make the surface of the workpiece and the blind holes and slits clean.

Working process：

The operator puts the cleaning basket with the workpiece on the feeding table, and then automatically sends it to the feeding position of the washing machine. The washing basket is pushed into the washing machine by the robot in order to clean and vacuum dry. Finally,send the cleaning basket out (take out the workpiece) to complete the whole process from washing to drying.

Clearningprinciple：

The cleaning principle of the hydrocarbon cleaning agent is simply cleaning according to the dissolving power of the solvent. Degreasing mechanism based on solubility to grease or oily contamination: similar miscibility principle. Water energy is also based on the miscibility of compounds with a similar OH structure to water, such as R-COOH (lower fatty acids), R-OH (lower alcohols), and the like.

The solubility between dissimilar liquids is closely related to surface tension and interfacial tension.

The interfacial tension value between the two is easily miscible